Inductive Proximity Sensors

ATEX and IECEx Group II certified. Submersible, general purpose, top-entry, constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh underwater environments and areas with constant moisture or condensation. Sealed to IP68 and includes integral heavy duty polyurethane cable. Available with a wide range of mountings.

ATEX and IECEx Group I & II certified. General purpose side-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh, hazardous gas and dust environments. Sealed to IP67 and includes 2-pin MS connector or integral stainless steel overbraided ETFE cable and -28 UNF, M6 or M8 mounting bolt.

Submersible, general purpose, side-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh underwater environments and areas with constant moisture or condensation. Sealed to IP68 and includes integral heavy duty polyurethane cable and -28UNF, M6 or M8 mounting bolt.

General purpose top-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. Internal electronics are isolated to minimise noise with increased bias voltage stability. Sealed to IP67 and includes 2-pin MS connector, 4-pin M12 connector or stainless steel overbraided ETFE cable and is available with a wide range of mountings.

ATEX and IECEx Group II certified. Submersible, general purpose, top-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh underwater environments and areas with constant moisture or condensation. Internal electronics are isolated to minimise noise with increased bias voltage stability. Sealed to IP68 and includes integral heavy duty polyurethane cable. Available with a wide range of mountings.

ATEX and IECEx Group I & II certified. General purpose side-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh, hazardous gas and dust environments. Internal electronics are isolated to minimise noise with increased bias voltage stability. Sealed to IP67 and includes 2-pin MS connector, 4-pin M12 connector or stainless steel overbraided ETFE cable and is available with a wide range of mountings.

ATEX and IECEx Group II certified. Submersible, general purpose, side-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh underwater environments and areas with constant moisture or condensation. Internal electronics are isolated to minimise noise with increased bias voltage stability Sealed to IP68 and includes integral heavy duty polyurethane cable. Available with a wide range of mountings.

ATEX and IECEx Group I & II certified. General purpose, top-entry, constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh, hazardous gas and dust environments. 3 wire device, requires -24V supply. Sealed to IP67 and includes 3-pin 62GB connector or stainless steel overbraided ETFE cable and is available with a wide range of mountings. Environment: Industrial, Hazardous, *Mining Frequency Range: 2Hz - 12kHz Temperature Range: -55C 140C Output: AC 100mV/g Entry Type: Top Entry

General purpose, top-entry velocity transducer with DC output. Made from robust stainless steel throughout for continuous vibration monitoring in harsh environments. Sealed to IP67 with industry standard two-wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes 3-pin 62GB connector, 2-pin MS connector or integral stainless steel overbraided ETFE cable and is available with a wide range of mountings.

ATEX and IECEx Group I & II certified. General purpose, top-entry velocity transducer with DC output. Made from robust stainless steel throughout for continuous vibration monitoring in harsh industrial environments. Sealed to IP67 with industry standard two-wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes integral stainless overbraided ETFE cable and is available with a wide range of mountings.

Submersible, general purpose, top-entry velocity transducer with DC output. Made from robust stainless steel throughout for continuous vibration monitoring in harsh underwater environments and areas with constant moisture or condensation. Sealed to IP68 with industry standard two-wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes integral heavy duty polyurethane cable and is available with a wide range of mountings.

ATEX and IECEx Group I & II certified. Submersible, general purpose, top-entry velocity transducer with DC output. Made from robust stainless steel throughout for long term vibration analysis in harsh underwater environments and areas with constant moisture or condensation. Sealed to IP68 with industry standard two-wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes integral heavy duty polyurethane cable and is available with a wide range of mountings.

ATEX and IECEx Group II certified. Submersible, general purpose, top-entry accelerometer with DC output proportional to acceleration. Made from robust stainless steel throughout for continuous vibration monitoring in harsh underwater environments and areas with constant moisture or condensation. Sealed to IP68 with industry standard two wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes integral heavy duty polyurethane cable and is available with a wide range of mountings.

General purpose, top-entry velocity transducer with DC output. Made from robust stainless steel throughout for continuous vibration monitoring in harsh environments. Internal electronics are enclosed in a Faraday cage and isolated to minimise noise. Sealed to IP67 with industry standard two wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes 2-pin MS connector, 4-pin M12 connector or stainless steel overbraided ETFE cable and is available with a wide range of mountings.

ATEX and IECEx Group I & II certified. General purpose, top-entry velocity transducer with DC output. Made from robust stainless steel throughout for continuous vibration monitoring in harsh industrial environments. Internal electronics are enclosed in a Faraday cage and isolated to minimise noise. Sealed to IP67 with industry standard two wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes 2-pin MS connector, 4-pin M12 connector or stainless steel overbraided ETFE cable and is available with a wide range of mountings.

ATEX and IECEx Group I & II certified. General purpose, side-entry velocity transducer with DC output. Made from robust stainless steel throughout for continuous vibration monitoring in harsh industrial environments. Internal electronics are enclosed in a Faraday cage and isolated to minimise noise. Sealed to IP67 with industry standard two wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes 2-pin MS connector, 4-pin M12 connector or stainless steel overbraided ETFE cable and is available with a wide range of mountings.

Submersible, general purpose, top-entry velocity transducer with DC output. Made from robust stainless steel throughout for continuous vibration monitoring in harsh underwater environments. Internal electronics are enclosed in a Faraday cage and isolated to minimise noise. Sealed to IP68 with industry standard two-wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes integral heavy duty polyurethane cable and is available with a wide range of mountings.

ATEX and IECEx Group II certified. Submersible, general purpose, top-entry velocity transducer with DC output. Made from robust stainless steel throughout for continuous vibration monitoring in harsh underwater environments and areas with constant moisture or condensation. Internal electronics are enclosed in a Faraday cage and isolated to minimise noise. Sealed to IP68 with industry standard two-wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes integral heavy duty polyurethane cable and is available with a wide range of mountings.

ATEX and IECEx Group II certified. Submersible, general purpose, side-entry accelerometer with DC output proportional to velocity. Made from robust stainless steel throughout for continuous vibration monitoring in harsh underwater environments and areas with constant moisture or condensation. Internal electronics are enclosed in a Faraday cage and isolated to minimise noise. Sealed to IP68 with industry standard two wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes integral heavy duty polyurethane cable and is available with a wide range of mountings

ATEX and IECEx Group I & II certified. General purpose, top-entry accelerometer with DC output proportional to acceleration. Made from robust stainless steel throughout for continuous vibration monitoring in harsh environments. Internal electronics are enclosed in a Faraday cage and isolated to minimise noise. Sealed to IP67 with industry standard two wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes 2-pin MS connector, 4-pin M12 connector or stainless steel overbraided ETFE cable and is available with a wide range of mountings.

General purpose, top-entry accelerometer with DC output proportional to acceleration. Made from robust stainless steel throughout for continuous vibration monitoring in harsh environments. Internal electronics are enclosed in a Faraday cage and isolated to minimise noise. Sealed to IP68 with industry standard two wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes integral heavy duty polyurethane cable and is available with a wide range of mountings.

ATEX and IECEx Group II certified. Submersible, general purpose, top-entry accelerometer with DC output proportional to acceleration. Made from robust stainless steel throughout for continuous vibration monitoring in harsh underwater environments and areas with constant moisture or condensation. Sealed to IP68 with industry standard two wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes integral heavy duty polyurethane cable and is available with a wide range of mountings.

General purpose, top-entry, constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. Includes 25mm base, integral TNC connector and available with a wide range of mountings. Uses coaxial cable (not twin core shielded like the 1100 which also has internal shielding and isolated electronics) and thus shows lower immunity to electrical interference.

Dual purpose, top-entry, constant current accelerometer with isolated AC(g) and temperature outputs. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. Sealed to IP67 and includes 62GB 3-pin connector or stainless steel overbraided ETFE cable and is available with a wide range of mountings.

Top-entry, constant current accelerometer for vibration analysis at elevated temperatures. Made from robust stainless steel throughout for long term analysis in harsh environments and up to 250C surface temperature; as the sensor head contains no electronics. An in-line charge amplifier connected with extra high-temperature cable (265C) can be located 5 metres from the heat source where temperatures are 120C or less.

General purpose accelerometer with isolated velocity output. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. Internal electronics are designed to reduce the susceptibility of noise interference from Radio frequencies. Sealed to IP67 and includes 2-pin C5015 military style connector. Available with a wide range of mountings.

General purpose top-entry constant current accelerometer with isolated AC and temperature outputs. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. Internal electronics are isolated to minimise noise with increased bias voltage stability. Sealed to IP67 and includes 4-pin M12 connector or stainless steel overbraided ETFE cable and is available with a wide range of mountings.

ATEX and IECEx Group II certified. General purpose topentry constant current accelerometer with isolated AC and temperature outputs. Made from robust stainless steel throughout for long term vibration analysis in harsh, hazardous gas and dust environments. Internal electronics are isolated to minimise noise with increased bias voltage stability. Sealed to IP67 and includes 4-pin M12 connector or stainless steel overbraided ETFE cable and is available with a wide range of mountings.

Dual purpose, side-entry, constant current accelerometer with isolated AC(g) and temperature outputs. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. Sealed to IP67 and includes stainless steel overbraided ETFE cable and is available with a wide range of mountings.

ATEX and IECEx Group II certified. General purpose, topentry velocity transducer with DC and temperature outputs. Made from robust stainless steel throughout for continuous vibration monitoring in harsh industrial environments. Sealed to IP67 with industry standard twowire 420mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes 4-pin M12 connector or stainless steel overbraided ETFE cable and is available with a wide range of mountings.

ATEX and IECEx ATEX and IECEx Group II certified. General purpose, top-entry accelerometer with DC output proportional to acceleration and temperature outputs. Made from robust stainless steel throughout for continuous vibration monitoring in harsh industrial environments. Internal electronics are enclosed in a Faraday cage and isolated to minimise noise. Sealed to IP67 with industry standard two wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes 4-pin M12 connector and is available with a wide range of mountings.

Dual purpose, side-entry, velocity transducer with DC and temperature outputs. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. Sealed to IP65 and includes stainless steel overbraided ETFE cable and -28 UNF, M6 or M8 mounting bolt.

Small footprint, general purpose, top-entry, constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. Sealed to IP67 and includes 3-pin 62GB style connector or stainless overbraided ETFE cable. Available with a wide range of mountings and 19mm diameter base.

Charge output accelerometers

Small footprint, general purpose, top-entry constant current accelerometer with an isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. Sealed to IP67 and includes 2-pin C5015 military style connector. Available with a wide range of mountings and 19mm diameter base.

General purpose, top-entry accelerometer with DC output proportional to acceleration. Made from robust stainless steel throughout for continuous vibration monitoring in harsh environments. Sealed to IP67 with industry standard two wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes 3-pin 62GB connector, 2-pin MS connector or integral stainless steel overbraided ETFE cable and is available with a wide range of mountings.

ATEX and IECEx Group I & II certified. General purpose, top-entry accelerometer with DC output proportional to acceleration. Made from robust stainless steel throughout for continuous vibration monitoring in harsh industrial environments. Sealed to IP67 with industry standard two wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes integral stainless steel overbraided ETFE cable and is available with a wide range of mountings.

Dual purpose, top-entry, velocity transducer with DC and temperature outputs. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. Sealed to IP65 and includes integral stainless overbraided ETFE cable and is available with a wide range of mountings.

Small footprint, general purpose, side-entry constant current accelerometer with an isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. Specially adapted for use on light weight, high speed machinery. Includes Sealed to IP67 and includes integral stainless overbraided ETFE cable with quick release, swivel base. Ultra-slim 15mm body and only 25mm high, ideal for use in restricted areas.

General purpose, top-entry accelerometer with DC output proportional to acceleration. Made from robust stainless steel throughout for continuous vibration monitoring in harsh environments. Internal electronics are enclosed in a Faraday cage and isolated to minimise noise. Sealed to IP67 with industry standard two wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes 2-pin MS connector, 4-pin M12 connector or stainless steel overbraided ETFE cable and is available with a wide range of mountings.

ATEX and IECEx Group I & II certified. General purpose, top-entry, constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh, hazardous gas and dust environments. 3 wire device, requires 24V supply. Sealed to IP67 and includes 3-pin 62GB connector or stainless steel overbraided ETFE cable and is available with a wide range of mountings Environment: Industrial, Hazardous, *Mining Frequency Range: 2Hz - 12kHz Temperature Range: -55C 140C Output: AC 100mV/g Entry Type: Top Entry

ICSXA30N04P1M8 Inductive round sensor M8 Length 30mm Non Flush Sensing distance 4mm PNP NO output M8 male connector connection

ATEX and IECEx Group I & II certified. General purpose top-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh, hazardous gas and dust environments. Sealed to IP67 and includes 2-pin MS connector or integral stainless overbraided ETFE cable and is available with a wide range of mountings.

Submersible, general purpose, top-entry, constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh underwater environments and areas with constant moisture or condensation. Sealed to IP68 and includes integral heavy duty polyurethane cable. Available with a wide range of mountings.

General purpose, side-entry, constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. Sealed to IP67 and includes 2-pin MS connector or integral stainless steel overbraided ETFE cable and -28 UNF, M6 or M8 mounting bolt.

Inductive round sensor M30 Length 30mm Flush Sensing distance 22mm PNP NO output M12 male connector connection

General purpose, top-entry accelerometer with DC output proportional to acceleration. Made from robust stainless steel throughout for continuous vibration monitoring in harsh environments. Sealed to IP68 with industry standard two wire 4-20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes integral heavy duty polyurethane cable and is available with a wide range of mountings.

Inductive round sensor M30 Length 30mm Flush Sensing distance 15mm PNP NO output 2m PVC cable connection

Ideally suited to any application where vibration in all three spatial axes needs to be measured, the MTN/1310 is supplied with an integral over-braided 4-core cable and three charge amplifiers encapsulated in a single die cast enclosure.

General purpose top-entry constant current accelerometer with 3 isolated AC outputs (X,Y and Z axes) and a 4 pin M12 connector. Internal electronics are isolated to minimise noise with increased bias voltage stability. Ideal for any application where vibration in all three spatial axes needs to be measured.

General purpose top-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. Sealed to IP67 and includes 2-pin MS connector or integral stainless overbraided ETFE cable and is available with a wide range of mountings.

Inductive round sensor M8 Length 30mm Non Flush Sensing distance 4mm PNP NO output 2m PVC cable connection

Inductive round sensor M8 Length 30mm Flush Sensing distance 2mm PNP NO output 2m PVC cable connection

Inductive round sensor M8 Length 30mm Flush Sensing distance 2mm PNP NO output M8 male connector connection

Inductive round sensor M12 Length 30mm Non Flush Sensing distance 8mm PNP NO output 2m PVC cable connection

Inductive round sensor M12 Length 30mm Non Flush Sensing distance 8mm PNP NO output M12 male connector connection

Inductive round sensor M12 Length 30mm Flush Sensing distance 4mm PNP NO output 2m PVC cable connection

Inductive round sensor M12 Length 30mm Flush Sensing distance 4mm PNP NO output M12 male connector connection

Inductive round sensor M18 Length 30mm Non Flush Sensing distance 14mm PNP NO output 2m PVC cable connection

Inductive round sensor M18 Length 30mm Non Flush Sensing distance 14mm PNP NO output M12 male connector connection

Inductive round sensor M18 Length 30mm Flush Sensing distance 8mm PNP NO output 2m PVC cable connection

Inductive round sensor M18 Length 30mm Flush Sensing distance 8mm PNP NO output M12 male connector connection

Inductive round sensor M30 Length 30mm Non Flush Sensing distance 22mm PNP NO output M12 male connector connection

Inductive round sensor M30 Length 30mm Flush Sensing distance 15mm PNP NO output M12 male connector connection